House with a usable attic, envelope roof and garage less than 320 m2

The 318 m2 house was located, erected on traditional foundations, i.e. reinforced footings and insulated foundation walls.Bearing and partition walls were made of silicate blocks with a thickness of 25 cm and 12 cm respectively. The roof truss was made in a traditional construction of softwood, impregnated. The roof of the building was covered with flat concrete tiles in graphite color.

As part of the warm installation of window woodwork, an energy-efficient window system with 6-chamber profiles with a depth of 82 mm was installed. In addition, warm installation of window frames was used, which will minimize the cost of maintaining the house, as well as concealed blinds. The building has been equipped with electrical, teletechnical, plumbing, recuperation installation, air heat pump installation. In addition, an alarm system was installed, as well as a conduit for photovoltaic panels.

20 cm thick graphite polystyrene was used to insulate the exterior walls, mineral wool was used for the roof, and silicone plaster was used to finish the facade of the building.